LCD Backlight Plate For iPad Mini 3 A1599 A1600 A1601

Pre-Installation Notes
Tips 1: test before installation
Do not remove any protective film or labels when testing. Pay attention to the problem of static electricity.
Before attempting any repair be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components of the phone.
Be sure to wear eye protection and be careful not to cut your finger on glass splinters.
Tips 2: Simulate tests
Screen replacement is a very fragile product. We strongly recommend testing prior to installation. Simulate test which means mobile phone separated (motherboard + LCD or screen) connected audio cable and new replacement power on test finished. If the test is correct install it. If it can't be shown, please contact us at the first time. And do not force its installation on the mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend the cable
Make sure the LCD cable is not bent too much. More than 90 degrees bent will cause a black screen.

About the product
1. LCD backlight board for iPad Mini 3 A1599 A1600 A1601.
2. Replace your broken or non-working LCD backlight board with a new one.
3. Each item has been checked and in good condition before shipment.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cell phone/mobile phone that you may cause during the changing of replacement parts.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed