LCD Backlight Board For Meizu MX4 Pro

Pre-Installation Notes
- Tips 1: test before installation
- When testing, do not remove any protective film or labels. Pay attention to the problem of static electricity.
- Before attempting any repair be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components of the phone.
- Be sure to wear eye protection and be careful not to cut your finger on glass splinters.
- Tips 2: mock test
- Screen replacement is a very fragile product. We strongly recommend testing prior to installation. Simulated test which means mobile phone apart (motherboard + battery + LCD or screen) audio cable connected and new replacement power on test finished. If the test is correct install it. If it can't be shown, please contact us at the first time. And don't force it to install it on the mobile phone. We will not be responsible if the mobile phone is damaged during the installation.
- Tips 3: Do not over-bend the cable
- Make sure the LCD cable is not bent too much. More than 90 degrees bent will cause a black screen.

Advantages
1. Large stock fast delivery can meet a large purchasing plan
2. Top quality original.
3. Complete fit and work
4. Quality guarantee supply with professional service.

About the product
1. High quality LCD backlight board for Meizu MX4 Pro.
2. Replace your broken or non-working LCD backlight board with a new one.
3. Each item has been checked and in good condition before shipment.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cell phone/mobile phone that you may cause during the changing of replacement parts.