LCD Screen and Digitizer Full Set with Frame Cubot J3

Before installation notes
1. Tips 1: Test before installation
When testing do not remove any protective film or labels. Pay attention to the problem of static electricity.
Before attempting a repair be sure to punish yourself with an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components inside the phone.
Be sure to wear eye protection and use caution not to cut your finger on glass splinters.
2. Tips 2: Simulate the tests
Screen replacement is a very fragile product. We strongly suggest testing before installation. Simulate testing which means mobile phone apart (Motherboard + LCD or Screen) Audio cable connected and new replacement Power on test finished. If it tests fine, install it. If you can't show please contact us at the first time. And please don't force it to install it on mobile phone. We will not be responsible once the Screen is installed.
3. Tips 3: Do not over-contain the Cable
Make sure the LCD Cable does not overwork. More than 90 degrees bent will cause black screen.
about the product
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for Cubot J3.
2. Replace the old broken cracked damaged one.
3. Make your device look more refreshing than ever.
4. In full fit and work fit.
5. Each item has been checked and in good condition before shipment.
6. Professional installation is highly recommended. We will not be responsible once the Screen is installed.