Use this bar to show information about your cookie policy.
Hover over the image to enlarge it.Click on image to zoom
/
Description
1) The tester uses DC 6V as its power source only.
2) Never try to connect and start the tester with a power source other than the tester itself.
3) For economical battery use, the tester will automatically shut down if it does not work for 30 minutes continuously.
4) One person sufficient to complete the cable continuity check.
5) Check the wiring error in 5E 6E coaxial cable and telephone line.
6) Such as open circuit short circuit jumper wire reverse connection or crosstalk interference.
7) Locate the wiring or connection error.
8) Measure the length of the wire and determine the distance of the open circuit and the short circuit.
9) Dynamically calibrate the length of the cable and measure the length with an accuracy of 97%.
10) Simple and easy use. Large screen to show the test result clearly.
11) Portable unit with long battery life (standby case 50 hours)
12) Auto power off with time delay.
13) Measure the length and match with or without a far-end recognizer.
14) Locate the cable and there are 8 far-end passive test jacks (ID NO. ID1-ID 8)
15) Far-end recognition with prompt voice.
16) Self-check function and automatically compensates for any change in battery capacity or ambient temperature.
17) Single board computer software watchdog design and reliable operation.
18) Overall dimension: 180x80x40mm
19) Power supply
4 x 1.5 V AA batteries with 16 mA power consumption (not included)
20) Display: 4x16 character special large screen LCD lattice (valid field of view 61.6x25.2mm)
21) Length Calibration: User can set the calibration factor by himself with a given length cable. The length of the calibration cable is more than 5 m.
Secure Payments
Your payment information is processed securely. We do not store credit card details nor do we have access to your credit card information.
