LCD Screen and Digitizer Full Assembly with Frame for Xiaomi MI 10T Pro 5G / MI 10T 5G / Redmi K30S M2007J3SC M2007J3SY (Silver)

About the product
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with frame) for Xiaomi MI 10T Pro 5G / MI 10T 5G / Redmi K30S M2007J3SC M2007J3SY
2. Replace the old broken cracked or damaged
3.Make your device look more refreshing than ever
4. Fully fit and functional
5. Each item has been checked and in good condition before shipment.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed


Pre-Installation Notes
Tips 1: test before installation
Do not remove any protective film or labels when testing. Pay attention to the problem of static electricity.
Before attempting any repair be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components of the phone.
Be sure to wear eye protection and be careful not to cut your finger on glass splinters.
Tips 2: Simulate tests
Screen replacement is a very fragile product. We strongly recommend testing prior to installation. Simulate test which means mobile phone separated (motherboard + LCD or screen) connected audio cable and new replacement power on test finished. If the test is correct install it. If it is not displayed, please contact us at the first time. And please don't force install it on mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend the cable
Make sure the LCD cable is not bent too much. More than 90 degrees bent will cause a black screen.
Although a set of tools appears in the image, these will not be included unless expressly requested through message. In which case they will be provided free of charge.